Frequently Asked Questions
Why am I cutting my top fillet panels too big?
Check for any step between the top of the side panel and the top panel. If there is a step, place a shim of the same thickness between the scribe tools and fillet. See figure 4 in the user guide.
How do I position Scribe tools mid-way between a run of units?
Attach a location plate to a Scribe tool, ensuring it is on the opposite face to the location pins. Offer the Scribe tools to the front edge of the carcass. Fix scribe tools into position. Remove the location plate before placing the scribe fillet or you will mark and cut the scribe 3mm too small.
What is the Scribe-Mate?
The Scribe-Mate is a universal tool designed for tradespeople and DIY enthusiasts to draw accurate scribe lines on fillets.
How does the Scribe-Mate work?
It features a unique clamp that rotates 360 degrees, holding the scribe firmly in position for accurate cuts without flexing.
What materials can I use the Scribe-Mate on?
The Scribe-Mate is suitable for panels between 15mm and 22mm thick, making it ideal for various carpentry projects.
What accessories come with the Scribe-Mate?
The product includes scribe tools, shims, a location plate, spanners, a mechanical pencil, and pencil refills.
Can I adjust the height when using the Scribe-Mate?
Yes, the clamps can be adjusted to accommodate board thicknesses between 15mm and 22mm. For thinner boards, you can use shims between the board and clamps.
What should I do if my product arrives damaged?
Please refer to our Terms and Conditions for the returns policy.
